Upnp; Rip - Observa Telecom RTSA04NU User Manual

RTSA04NU User´s Manual
E d i t i o n
E d i t i o n
3.5.4

UPnP

Click on Servicios  Upnp to access this page. In this page, you can configure universal plug and play
(UPnP). The system acts as a daemon after you enable UPnP.
UPnP is used for popular audio visual software. It allows automatic discovery of your device in the network.
If you are concerned about UPnP security, you can disable it. Block ICMP ping should be enabled so that the
device does not respond to malicious Internet requests.
By default UPnp is enabled for any interface, once Internet is up, UPnP will be linked automatically to that
active interface unless user force the connection to another interface.
3.5.5

RIP

Click on Servicios  RIP to access to this page.
This page is used to select the interfaces on your device that use RIP and the version of the protocol used.
If you are using this device as a RIP-enabled device to communicate with others using the routing information
protocol, enable RIP and click Apply to save the settings. Then, you can configure interface.
E d 1
E d 1 Page 29 of 47