Pin Configuration; 3G Driver - Observa Telecom RTSA04NU User Manual

RTSA04NU User´s Manual
E d i t i o n
E d i t i o n
Enable 3G Backup
Network type
APN
Dial_Number
Account
Password
NAPT
Connection Mode
Inactivity Timeout
Backup delay time
3.4.5

PIN CONFIGURATION

Click Pin Configuration to enable the 3G PIN code as shown in the following figure. Label "Estado" will
inform you about dongle status, if PIN is needed or not, or if modem has been detected.
3.4.6

3G DRIVER

By default there is a list of dongles supported by HomeStation, but there will be some of them, that could
be not supported. For this, Observa CPE allows to load new drivers in order to support new 3G dongles. If
there is a restore to default settings, these loaded drivers will be removed.
Load new driver and reboot CPE in order to make effective the change. Also you can clean flash memory of
these drivers by clicking on 'Limpiar' button.
E d 1
E d 1
Field
You may choose to enable or disable 3G
backup.
It's possible to select 2G or 3Gby default is in
Auto mode.
Enter the access point.
Enter the dial number.
Enter the account.
Enter the password.
Enable or Disable.
Continuous and On demand
Set the period without flow before disconnecting
3G connection. When 0 is set, 3G connection
will always be connected regardless of flow.
Set the period before starting 3G dial after ADSL
disconnection.
Description
Page 22 of 47