RTSA04NU User´s Manual
E
d
i
t
i
o
n
E
d
i
t
i
o
n
3.4.7
ETH/GRE
Use this section for configuring the settings of transparent Ethernet over GRE Tunnel:
3.4.8
VPN: PPTP/L2TP
Use this section for configuring the settings of VPN(PPTP or L2TP)
3.5.-
SERVICES
3.5.1
DHCP
By default, Enable DHCP Server is selected for the Ethernet LAN interface of the device. DHCP service
supplys IP settings to workstations configured to automatically obtain IP settings that are connected to the
device through the Ethernet port. When the device is used for DHCP, it becomes the default gateway for
DHCP client connected to it. If you change the IP address of the device, you must also change the range of
IP addresses in the pool used for DHCP on the LAN. The IP address pool can contain up to 253 IP addresses.
E
d
1
E
d
1
Page 23 of 47
Need help?
Do you have a question about the RTSA04NU and is the answer not in the manual?