Table of Contents
Advertisement
Viewfinder automatically.
Manual:
The product does not switch between the monitor display and the Electronic Viewfinder
display automatically.
You can switch the display by pressing the FINDER/MONITOR button.
Hint
If you want to switch the display mode temporarily when [FINDER/MONITOR] is set to
[Auto], press the FINDER/MONITOR button.
[154] How to Use
Release w/o Lens
Sets whether or not the shutter can be released when no lens is attached.
1. MENU →
Menu item details
Enable:
Releases the shutter when no lens is attached. Select [Enable] when attaching the product
to an astronomical telescope, etc.
Disable (default setting):
Does not release the shutter when a lens is not attached.
Note
Correct metering cannot be achieved when you use lenses that do not provide a lens
contact, such as the lens of an astronomical telescope. In such cases, adjust the
exposure manually by checking it on the recorded image.
[155] How to Use
SteadyS. w/ shut.
Reduces the image blur not only at the moment of releasing the shutter but also while
pressing the shutter button halfway down.
Using shooting functions
(Custom Settings) → [Release w/o Lens] → desired setting.
Using shooting functions
Setting the other functions of this product
Setting the other functions of this product
Advertisement
Table of Contents
