Table of Contents
Advertisement
Battery
Description
Battery, 3-cell, 41-WHr, 3.615-AHr, Li-ion
Battery cable
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Remove the battery:
1.
Disconnect the battery cable from the system board (1).
2.
Remove the three PM2.0×2.5 screws (2) that secure the battery to the computer.
3.
Remove the two PM2.0×6.0 screws (3) that secure the connector to the computer.
4.
Lift the battery and the connector from the computer (4).
5.
Disconnect the connector from the battery (5).
6.
If replacing the battery cable, remove the cable from its routing path in the computer (6).
Reverse this procedure to install the battery.
Bottom cover on page
22).
Spare part number
844203-855
905566-001
Component replacement procedures
23
Advertisement
Table of Contents
