Table of Contents
Advertisement
Safety Instructions
SAFETY INSTRUCTIONS
IMPORTANT
INFORMATION
When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all the instructions before using this sewing-/embroidery
computer.
When the sewing-/embroidery computer is not in use, it
should be disconnected from the electricity supply by
removing the plug from the outlet.
DANGER!
To reduce the risk of electrical shock:
1. The sewing-/embroidery computer should never be left
unattended when plugged in.
2. Always unplug this sewing-/embroidery computer from the
electrical outlet immediately after using and before cleaning.
3. LED Radiation – Do not view directly with optical instruments.
Class 1M LED product.
2
WARNING!
To reduce the risk of burns, fire, electric shock or injury to
persons:
1. Use this sewing-/embroidery computer only for purposes as
described in this manual. Use only attachments, accessories
and parts recommended by the manufacturer.
2. Do not allow this sewing-/embroidery computer to be used as
a toy. Close attention is necessary when this sewing-/
embroidery computer is used by or near children and infirm
persons. The sewing-/embroidery computer is not intended
for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the sewing-/embroidery
computer by a person responsible for their safety. To ensure
children do not play with the sewing-/embroidery computer
they must be supervised.
3. Never operate this sewing-/embroidery computer if:
⦁
it has a damaged cord or plug,
⦁
it is not working properly,
⦁
it has been dropped or damaged,
⦁
it has fallen into water
Return the sewing-/embroidery computer to your local
authorized BERNINA dealer for examination or repair.
4. Never operate the sewing-/embroidery computer with any air
openings blocked. Keep ventilation openings of the sewing-/
embroidery computer free from the accumulation of lint, dust
and loose cloth.
5. Keep fingers away from all moving parts. Special care is
required around the sewing needle.
6. Never insert any objects into any openings on the sewing-/
embroidery computer.
7. Do not use the sewing-/embroidery computer outdoors.
8. Do not operate the sewing-/embroidery computer where
aerosol products (sprays) or oxygen are being used or where
oxygen is being administered.
9. Do not pull or push the fabric while stitching. This may deflect
the needle, causing it to break.
10. Do not use bent needles.
11. Always use the original BERNINA stitch plate. The wrong
stitch plate can cause needle breakage.
12. To disconnect, turn power switch to «0» (off), then remove
the plug from the outlet. Do not unplug by pulling the cord,
instead grasp the plug to pull it from the outlet.
13. Turn power switch to «0» (off) when making any adjustments
in the needle area, such as changing the needle or the
presser foot, etc.
14. Always unplug the sewing-/embroidery computer from the
electrical outlet when carrying out cleaning or maintenance
work or any other user servicing adjustments mentioned in
this manual.
15. This sewing-/embroidery computer is provided with double
insulation (except USA and Canada). Use only identical
replacement parts. See instructions for servicing of double-
insulated products.
Advertisement
Table of Contents
