Listening Over The Vehicle Speakers; Listening To Auxiliary Audio Sources - Rosen ClearVue Overhead Monitor Owner's Manual

Using the System

Listening Over the Vehicle Speakers

The ClearVue system uses an FM Modulator to allow the
vehicle speakers to play sound from the video source. The FM
Modulator will generate a very-low-power FM signal on either
89. 1FM or 88.7 FM (two settings are available in case you
have a strong FM station in your area using one of these
frequencies).
To play ClearVue sound over the vehicle speakers:
Turn on the ClearVue system.
Turn on the radio and tune it to 89.1 FM.
If no ClearVue audio is heard, press and release the
SPEAKER ON/OFF button on the remote until "FM ON" is
displayed on the screen.
If no ClearVue audio is heard, set your radio to 88.7 FM.
To turn off ClearVue sound over the vehicle speakers:
Press and release the SPEAKER ON/OFF button until "FM
OFF" is displayed on the screen. This is useful when rear-seat
passengers are using the headphones.
Listening to Auxiliary Audio-only Sources
You can use auxiliary audio sources (such as portable CD,
TM
MiniDisc , or MP3 players) with the ClearVue system.
Connect the source unit to the auxiliary line audio RCA inputs
(such as the red and white LINE 2 inputs on the front of the
VCR) and select the LINE 2 input with the MODE button.
Page 9