Using The Vcr - Rosen ClearVue Overhead Monitor Owner's Manual

Using the System

Using the VCR

Power
Indicator Lights for
Stop
button
Power, Recording,
Eject
SLP, and Heat/Dew
Record
Modes; IR Remote eye
In order to watch a video tape, insert the tape into the VCR.
The tape will begin playing and the picture will be visible on
the screen.
While viewing a video tape, these functions are available from
the remote:
To view the tape at a slower speed, use the SLOW button.
To rewind the tape, use the REW button.
To fast-forward the tape, use the FFWD button.
To pause or resume playback, use the PLAY/PAUSE button.
To stop playback, use the STOP button.
To eject the tape, use the EJECT button.
VCP Protection System
The VCR has a protection system which will prevent it from
operating in extreme high temperatures, or if condensation
(dew) is detected within the VCR itself. This helps prevent
damage to video tapes used in such conditions. If extreme
temperatures exist, or if moisture is detected, the VCR will not
load the tape, and the DEW/HEAT indicator will illuminate on
the face of the VCR. If this should occur, wait until the tem-
perature has returned to a normal range, and any condensa-
tion has had time to evaporate, before using the system. Note
that while this mode is active, the TV Tuner function is not
available.
Play
Rewind
Page 6
Tape
Door
Line 2
inputs
Fast
Forward