Frequently Asked Questions - Rosen ClearVue Overhead Monitor Owner's Manual

Frequently Asked Questions

Why don't I hear ClearVue sound over my radio?
Try both 89.1 FM and 88.7 FM on your radio dial, and make
sure that the FM Modulator is on by pressing and releasing the
"SPEAKER ON/OFF" button on the remote until "FM ON" is
displayed on the screen.
Why doesn't the TV button on the remote turn on
the TV Tuner?
Some buttons on your ClearVue remote are for other Rosen
systems and products. Use the MODE button to turn the TV
Tuner on with your system.
How do I change channels on the TV Tuner?
Use the PREV TRK and NEXT TRK buttons on the remote.
Why did the headphones stop working?
Check the power switch and the volume control. Check the
MUTE button on the remote.Then try new batteries.
Why did the remote stop working?
Try new batteries.
Why has picture quality worsened with the VCR?
The VCR probably needs cleaning with a good-quality head
cleaning kit.
Why do I have poor ClearVue sound quality some-
times over the speakers?
You may have a strong radio station using the same FM
frequency as the FM Modulator is set to - see your Rosen
dealer to have your frequency re-set.
Can I use ClearVue with an aftermarket audio
system that has an auxiliary input, instead of using
the ClearVue FM Modulator?
Yes, an optional cable is required - see your Rosen dealer.
For additional answers, see your Rosen dealer or visit
www.rosenproducts.com
Page 12