Quick Reference Guide - Rosen ClearVue Overhead Monitor Owner's Manual

Video entertainment system
Table of Contents

Advertisement

Quick Reference Guide

To lower the screen:
Press the release button as shown.
To watch a videotape:
Turn the ignition switch to the Run
or Acc position.
Press the
button on the remote.
POWER
Insert a videotape into the VCR. It will begin playing automati-
cally, and the tape's picture will appear on the screen.
To listen over the vehicle speakers:
Turn on the vehicle radio and tune it to 89.1 FM.
Press the
button on the remote.
POWER
Press and release the
SPEAKER ON/OFF
until
is displayed on the screen.
"FM ON"
If no sound is heard, try 88.7 FM.
To use an AUX source:
(such as an optional videogame or camcorder)
Connect the RCA audio and video outputs of the device to the
Line 2 Inputs on the front of the VCR.
Press and release the "MODE" button until "LINE 2" is dis-
played on the screen. The aux source image should now be
visible on the screen.
To watch broadcast television:
(requires the optional TV Antenna)
Turn the ignition switch to the Run or Acc position.
Press the
button on the remote.
POWER
Press and release the
MODE
current channel number are displayed (for example, "CH 2").
Use the
and
PREV TRK
Release button
button on the remote
button until "CH___" and the
buttons to change channels.
NEXT TRK
Page 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clearvue

Table of Contents