Assembly Instructions - Everlast EV2.5 Owner's Manual

ASSEMBLY INSTRUCTIONS

!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS.
PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!!
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding
accidentally during shipping. If this strap is not removed properly, the treadmill could spring open
unexpectedly and cause injury if someone is standing near the treadmill when the strap is removed.
T o ensure your safety during the removal of the shipping strap, please make sure the treadmill is
positioned flat on the ground, in the orientation it would be in if you were using the treadmill. Do not
turn the treadmill up on its side while removing the shipping strap. This could cause the treadmill's
folding mechanism to spring open. If the end of the Velcro strap (that you need to grab to remove it)
happens to be under the treadmill deck, reach under the deck to grab it, but do not tilt the treadmill
up to gain access to the strap end.
Unpack the treadmill and locate the hardware pack. The hardware pack contains tools and
hardware needed for the assembly of each step.
WARNING DECAL REPLACEMENT
The decals shown have been placed on the treadmill. If a decal is missing or illegible, please
call our Customer Service Department, to order a free replacement decal (see ORDERING
REPLACEMENT PARTS at page 2.). Apply the decal in the location shown.
Note: The decal shown at the right is 50% of actual size.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
Serial Number Decal
6
Dyaco Canada Inc. 2021