Table of Contents
Advertisement
IMPORTANT - ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY STEPS. UNPACK THE BOX AND PLACE ALL PARTS ON THE FLOOR.
CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART AGAINST THE MANUAL FIRST.
REMEMBER SOME PARTS ARE PRE-ASSEMBLED TO LARGER COMPONENTS.
NOTE: FOR SAFETY REASONS, DO NOT CUT THE PACKING BELT (F) UNTIL YOU'VE COMPLETED THE
ENTIRE ASSEMBLY PROCESS.
STEP 1
1. Lift the Left Upright Tube (A05) upwards.
2. Fix the Left Upright Tube (A05) to the Base Frame (A01). Use 1pc Bolt (D46) and 1pc Lock Washer (D64) to
attach the side. Use 1pc Bolt (D50) and 1pc Lock Washer (D64) to attach the front. Secure using Allen
Wrench (B12).
3. Repeat the above step to attach the Right Upright Tube (A06) to the Base Frame (A01).
NOTE: During assembly, support the Upright Tubes (A05 & A06) with your hand to prevent them from falling down.
D64
A05
D50
D50
D46
A01
For queries or additional product information, please call our Service Centre on:
Please have your model name on hand.
Everlast/SA
ASSEMBLY INSTRUCTIONS
A06
D64
D64
087 997 0865
www.everlastsa.co.za
everlast_sa
D46
8
Hide quick links:
Advertisement
Table of Contents
