ICON PRO-FORM 680 TRAINER User Manual page 11

11. Be careful not to pinch the wires in the Right
Handrail (105).
Attach the console assembly to the Right
Handrail (105) with two #8 x 3/4" Screws (1), a
1/4" x 1 1/4" Bolt (6), and a 1/4" Star Washer
(10). Repeat this step on the left side of the
console assembly. Start all four Screws and
both Bolts before tightening any of them.
See steps 4–9. Tighten all the bolts used in
these assembly steps.
12. If necessary, press the Left Accessory Tray (94)
and the Right Accessory Tray (99) into the con-
sole assembly.
11
Console Assembly
105
1
12
Console
Assembly
11
10
6
94
99