Rosco Delta 3000 Product Specifications

PRODUCT DESCRIPTION

Using precision designed components coupled with a new
electronics design known as Delta Technology™, Rosco's new
Delta 3000™ Fog Machine provides the tools to make fog
and smoke a more versatile and creative component for any
performance, film or video presentation.
The heat exchanger of the Delta 3000, the heart of any fog
machine, is made of cast aluminum housing a robust 1500
watt heater element. The design of the heat exchanger, along
with a unique electronic thermostatic control, is the key to
creating unparalleled volumes of smoke – volumes large
enough to fill most stages in less than a minute.
The other major innovation of the Delta 3000 is the harnessing
of the Delta Technology to control the fog effect. This state-of-
the-art electronics design allows designers and technicians to
use fog and smoke the way they use light or sound: to have
the effect start on cue at the correct level and end on cue. The
Delta 3000 makes that possible through the choice of three
different remote control devices.
The Digital/DMX Remote is the most sophisticated of these
devices. The timers are "real time" timers which can be set in
exact one-second increments from one second to 10 minutes.
An LCD display on the device will display the operational
menu in any of six languages (English, Spanish, French,
German, Portuguese or Italian). The LCD display also works
with a rotary encoder to make setting the DMX address easy
and precise. It also provides the user with "error" messages
when the machine is running low on fluid or cannot find a
DMX signal.
The Analog/DMX Remote offers volume control, DMX control
and on/off sequencers. The interface is analog using hardy
switches and knobs to operate the machine. The DMX address
is easily set from three rotary potentiometers, rather than the
cumbersome dip switches commonly used. The unit has a red
LED to indicate that the Delta 3000 is running low on fluid.
The Solo DMX Remote is designed for those situations where
the fog machine will always be cued and operated from a
DMX light board. It has the same three rotary potentiometers
that the Analog/DMX Remote has for setting the DMX
address. It also has the red LED for signaling that the machine
is running low on fluid, plus other LEDs to let the user know if
the machine is heating or ready for operation.
w w w. r o s c o . c o m
52 Harbor View Avenue, Stamford, CT 06902 • (203)708-8900 • 1(800)ROSCO NY • Fax: (203)708-8919
1265 Los Angeles Street, Glendale, CA 91204 • (818)543-6700 • 1(800)ROSCO LA • Fax: (818)662-9470
Also in: Toronto, London, Madrid, São Paulo and Sydney

PRODUCT SPECIFICATIONS

Length:
Height:
Width:
Weight:
Heater:
Power Requirements:
Volume Control:
Maximum Fluid Consumption: 6.5 liters/hr.
Warm-up Time:
Reservoir:
Air Input:
Timers:
DMX Interface:
Hose Adaptor:
Ducting Hose:
TM
DELTA 3000
16.5" (42 cm)
7" (17.8 cm)
13" (33 cm)
18.5 lbs. (8.41 kg)
1500W
120v, 14A
240v, 7A
Yes
5 minutes
4 liters
Yes
Standard
Standard
4" (10.2 cm)
4" x 25' (10.2 cm x 7.62 m)
Page 1 of 2