Toshiba B-FP Series Manual page 9

[Power Save] Group
[Time to the sleep mode]
Sets a period of time from when the printer ceases to be used until it enters the sleep mode.
The printer does not enter into the sleep mode when "0" is set.
Default
Range
[Auto Power-off Time]
Sets a period of time automatically to turn the power off when the printer ceases to be used.
The power is not automatically turned off when "0" is set.
Default
Range
[LCD Back Light Off Time]
Sets a period of time from when the printer ceases to be used until its panel display is turned off.
The panel display is not turned off when "0" is set.
Default
Range
[Action] group
[Headcheck at power on]
Selects whether or not to perform a head broken dot check when the power is turned on.
Default
Options
[Headcheck at cover close]
Selects whether or not to perform a head broken dot check when the cover is closed.
Default
Options
[Printing with broken dots]
Selects whether or not to continue printing after a head broken dot check error has occurred.
Default
Options
[Feed at cover close]
Selects whether or not to feed the media to its home position after the cover is closed.
Default
Options
003 (sec)
000 to 030 (sec)
120 (min)
000 to 300 (min)
003 (sec)
000 to 030 (sec)
Disable
Disable, Enable
Disable
Disable, Enable
Disable
Disable, Enable
Disable
Disable, Enable
7