Table of Contents
Advertisement
Selecting and adding files
You can select and add BASIC files.
One BASIC file can be registered in [Main Program] and [System Mode Program] and multiple ones can be
registered in [Data File], respectively.
[Start Block]
Specifies the area of the printer where the main program, system mode program and data files are
stored.
Set a value so that the area does not overlap the other blocks, considering each program, size of data
file and the start block.
The value in the start block should not exceed the size selected in [BASIC File Storage Area].
Default
Range
* The available range as a printer is 0 to 13.
Program files
Selects one file to register.
If the reading of a file or the creating of download data has failed, an error message will be displayed.
0
0 to 49
34
Advertisement
Table of Contents
