Table of Contents
Advertisement
[WEP] group
[Key Index]
Sets the index of the WEP key to be used.
Default
Range
[Input Type]
Selects the code for entering a WEP key.
When the code is changed, the WEP key set is cleared.
Default
Options
[WEP Key]
Sets the WEP key used for encrypting the authentication system.
Select the WEP key size and enter the WEP key.
When the WEP key size is changed, the WEP key set is cleared.
<40 bits>
When "HEX" is selected for [Input Type], enter ten fixed alphanumeric characters from "0" to
"F".
Entries are not case-sensitive.
Two characters indicate the one-character HEX. (E.g.: "30" indicates &H30. "41" indicates
&H41.)
The range of the one-character HEX is "20" to "7E".
When "ASCII" is selected for [Input Type], enter five fixed alphanumeric characters.
Since the password is security information, it is displayed with hidden characters except when it is
being entered.
Default
Options
#1
#1 to #4
HEX
HEX, ASCII
Disable
Disable, 40 bits
19
Advertisement
Table of Contents
