Page 1
¥…'RƒW-1 CONTENTS NAME OF PARTS ... 8 USING THE SELF-TIMER ... 12 ATTACHING THE STRAP ... 9 TAKING PICTURES ... 13 INSERTING THE BATTERY ... 9 AUTO-FOCUS SHOOTING ... 13 SETTING THE FILM SPEED ... 10 REWINDING THE FILM ... 14 LOADING THE FILM ...
NAME OF PARTS Built-in Flash Film Take-up Spool Lamp for Red-Eye-Reduction /Self-timer Finder Eyepiece Film Counter Window Flash ready monitor Mid-roll Rewind Button Film Rewind Shaft Self-timer Button Film Chamber Shutter Release Button Film Guides Auto-focus Sensor Windows Tripod Socket Auto Exposure Metering Window Battery Chamber Cover Viewfinder Window...
SETTING THE FILM SPEED (Fig.4) LOADING THE FILM 1. This camera is designed to use DX-coded films 1. Push the Back Cover Lock downward to open with ISO ranging from 100 to 400. (Fig.5) 2. Your camera automatically sets the correct film 2.
1. If additional light is required,the Built-in Flash USING THE SELF-TIMER auto-matically acts. 1. Compose your picture with the camera on a 2. When the flash is recharged and full,the Flash steady support or fixed on a tripod. Ready Monitor lights up.(Fig.
3. Keeping the shutter release button depressed REWINDING THE FILM recompose your picture desired. 1. After the end of the film has been reached,the • Hold the camera steady and gently press the film will automatically rewind. shutter release button fully down. 2.
tamperes-with,or altered by anyone other than the minded that a longer tripod screw might punc- manufacturer.other than for the warranty herein. ture and damage the camera. we are not responsibe for loss, damage or incon- 7. Please never try to disassemble the camera, venience of any kind.
Need help?
Do you have a question about the 28 AFS and is the answer not in the manual?
Questions and answers