Page 1
Rollei Nano 60 Rollei Nano 80 Hinweise zum Gebrauch Instructions for use...
Page 2
Bei beschädigtem Gehäuse keine Innenteile berüh- gezoomt oder der Film zurückgespult wird, › ren, um elektrischen Schlag zu vermeiden. der zurückgespulte Film noch in der Rollei Nano liegt, » › Falls die Kamera naß werden sollte, aus dem gleichen der Blitz ist noch nicht aufgeladen ist, ›...
INHALTSVERZEICHNIS Wir wünschen Ihnen viel Erfolg beim Fotografieren mit der Empfehlung aus dem Vorbeugungsprogramm der Rollei Nano. Bitte lesen Sie diese Anleitung vor Gebrauch Kriminalpolizei: sorgfältig durch, damit Sie die vielen Möglichkeiten Ihrer Wer seine Wertsachen dauerhaft kennzeichnet, fotografiert Kamera optimal nutzen können.
BEZEICHNUNG DER TEILE Selbstauslöser-/ Anti-Rotaugen-LED Auslöser Autofokusfenster Zoom-Tasten Blitz (Tele/Wide) Belichtungssensor Sucherfenster Filmfachentriegelung Objektiv...
Page 5
BEZEICHNUNG DER TEILE C/H/P-Hebel (Bildformat) Autofokus- Kontroll-LED (grün) Zoom-Tasten (wide/tele) Sucher Dioptrienkorrektur Filmfachdeckel Stativgewinde Batteriefachdeckel on/off Hauptschalter LCD-Monitor Trageschlaufenöse flash Blitzfunktionstaste mode Aufnahmefunktionstaste Rückspulstarttaste title Titelwahltaste date Datum/Zeit-Wahltaste...
LCD-MONITOR LCD-Monitor Bitte beachten Bei ausgeschalteter Kamera zeigt das LC-Display Datum und Bildzahl. Datum/Zeit/Titelnummer Titelspeicheranzeige Batteriekontrolle S. 11 Unendlich-Einstellung S. 30 Selbstauslöser S. 29 Anti-Rotaugen-Funktion S. 25 Langzeitsynchronisation S. 27 Blitzabschaltung S. 28 Aufhellblitzen S. 26 Bildzählwerk Filmladesymbol...
Page 7
APS-(ADVANCED PHOTO SYSTEM)-FUNKTIONEN Index-Print 35mm-Film C = classic H = HDTV APS-Film P = Panorama 1. Neues Filmformat IX-240 2. Index-Print › Die Patrone ist kleiner als die des normalen 35mm-Films. Mit dem entwickelten Film und den Vergrößerungen wird So ist der APS-Film vor und nach der Belichtung voll- ein Index-Print geliefert.
Page 8
3. Informationsaustausch Bitte beachten › (IX-Funktion) Fachgerechte Entwicklung garantieren Fotogeschäfte Alle für eine typgerechte Verarbeitung des Films nötigen mit dem APS-Symbol. Informationen sind (magnetisch oder optisch) gespeichert. Die PQI (Print Quality Improvement)-Funktion ermöglicht eine bestmögliche Qualität der Vergrößerungen. Bildformat und Titel für den Rückseitenaufdruck können nachträglich geändert werden...
SUCHER/AUTOFOKUS-LED Sucher Autofokus-LED › Bildfeldbegrenzung bei Nahaufnahme (70 cm) Bei leichtem Andrücken des Auslösers leuchtet die Bildfeldbegrenzung grüne Kontroll-LED auf. › Autofokus-Meßfeld LED leuchtet: Auslösen möglich › LED blinkt schnell: Motiv zu nahe (unter 70cm). Der Auslöser blockiert. › LED blinkt langsam: Verwacklungsgefahr. Kamera auf- legen oder Stativ verwenden.
Batteriefach wie abgebildet öffnen. Nur eine Lithium-Batterie des Typs CR2 verwenden. › › Neue Batterie richtig herum (Plus-Pol voran) einlegen. Nach 3 Minuten Nichtbenutzung schaltet die Rollei Nano › Batteriefachdeckel schließen. automatisch ab, um Energie zu sparen. › Bei längerem Nichtgebrauch der Kamera die Batterie entnehmen.
BATTERIEKONTROLLE Batteriekontrolle Bitte beachten › Das LCD-Symbol informiert über den Batteriezustand. Batterie nur bei ausgeschalteter Kamera wechseln. › Bei Kälte oder auf Reisen Ersatz-Batterie mitnehmen. › › Kein Symbol – Batterie in Ordnung Bei niedrigen Temperaturen läßt die Batterieleistung › Symbol erscheint –...
Die Patrone muß das Symbol zeigen (Nano 80). Display angezeigt. (Nach 2 s erscheint statt der Film- oder das Symbol bei der Nano 60. Andere Filme empfindlichkeit wieder das Datum.) (Symbole , , ) können nicht verwendet werden. › 5. Wenn der Film nicht richtig transportiert wird, blinkt das Film nur mit Batterie in der Kamera einlegen.
FILMZURÜCKSPULEN Automatisches Zurückspulen Manueller Rückspulstart/MRC-Funktion › › Der voll belichtete IX-Film wird automatisch zurück- Teilbelichtete Filme können durch Drücken des manuel- gespult. len Rückspulstartknopfes jederzeit zurückgespult wer- › Bei vollständig zurückgespultem Film zeigt das Bild- den. Die Filmpatrone zeigt anschließend das Symbol für zählwerk und das -Symbol blinkt.
DIOPTRIENEINSTELLUNG TRAGESCHLAUFE ANBRINGEN Dioptrieneinstellung Trageschlaufe anbringen › › Objektiv auf tele stellen und an der Dioptrieneinstellung Trageschlaufe wie drehen, bis das Bild scharf erscheint. abgebildet befestigen.
KAMERA EINSCHALTEN / ZOOMEN Kamera Einschalten / Zoomen Bitte beachten: › › Hauptschalter drücken. Die Objektivabdeckung öffnet Erhält das Objektiv während des Zoomens einen Stoß sich, die LCD-Anzeigen erscheinen. oder wird in seiner Bewegung behindert, erscheint › Motiv durch den Sucher anvisieren und mit der Zoom- dem LC-Display.
Page 16
KAMERAHALTUNG Kamerahaltung Bitte beachten › › Mit der Hand durch die Trageschlaufe greifen. Objektiv, Autofokus- und Belichtungssensor-Fenster so- › Kamera ruhig und fest mit beiden Händen halten, beson- wie den Blitz nicht durch Finger, herabhängende Haare ders bei Tele, um nicht zu verwackeln. oder der Trageschlaufe verdecken.
FOTOGRAFIEREN › Fotografieren Bei zu wenig Licht blitzt die Rollei Nano automatisch. › › Motiv mit dem Autofokus-Meßfeld in der Mitte des Blitzbereich für richtige Belichtung (ISO 200) Sucherbildes anvisieren. (S. 9) › Weitwinkel Tele Den Auslöser leicht drücken. Wenn die grüne LED...
SCHÄRFESPEICHER › Schärfespeicher Kamera ruhig halten und dann Auslöser ganz herunter- › Der Schärfespeicher hilft beim Scharfstellen auf Objekte drücken. › außerhalb der Bildmitte (1). Das funktioniert wie folgt: Loslassen des Auslösers hebt die Schärfespeicherung 1. AF-Meßfeld auf das Hauptmotiv richten. (2) wieder auf.
DATUMSAUFDRUCK - - - - - - ‘ 9 9 3 20 Keine Jahr - Monat - Tag Einbelichtung 3 20 ‘ 9 9 1. Einstellung des Datumformats › date-Taste drücken, um die einzelnen Formate aufzuru- Monat - Tag - Jahr fen.
Page 20
DATUMS-/ZEITEINSTELLUNG 2 sec. 2. Datums-/Zeiteinstellung › date-Taste 2 s lang drücken, bis der erste Wert blinkt. › ‘ 9 8 3 20 Zum Einstellen der Werte Zoom-Tasten drücken (tele date aufwärts, wide abwärts). › Erneutes Drücken der date-Taste bewirkt, daß der nächste Wert aufgerufen wird und blinkt.
TITELAUFDRUCK Sprachcodes und Titeltexte ENGLISCH GE -1 - ICH LIEBE DICH DEUTSCH GE -2 - DANKESCHÖN GE -3 - HERZLICHE GLÜCKWÜNSCHE SPANISCH FRANZÖSISCH GE -4 - FRÖHLICHE WEIHNACHTEN JAPANISCH GE -5 - FROHES NEUES JAHR ICH LIEBE DICH Titelaufdruck Bitte beachten »...
BILDFORMATE C = classic (2:3) Bildformate › Gewünschtes APS-Bildformat mit dem C/H/P-Hebel wählen. › Nachträgliche Änderungen des Bildformates sind im Labor möglich. H = HDTV (9:16) P = Panorama (1:3)
BLITZFUNKTIONEN Blitzautomatik Rotaugen- Aufhellblitz Langzeit- Blitz aus Reduzierung Synchronisation Blitzfunktionen Mit der flash-Taste kann nach Bedarf eine der folgenden Blitzfunktionen gewählt werden. › Blitzautomatik › Rotaugen-Reduzierung › Aufhellblitz › Langzeitsynchronisation › Blitz aus...
AUFNAHMEFUNKTIONEN Normale Automatik Selbstauslöser Unendlich Aufnahmefunktionen Mit der mode-Taste kann nach Bedarf eine der folgen- den Aufnahmefunktionen gewählt werden. › Normale Automatik › Selbstauslöser › Unendlich...
ANTI-ROTAUGEN-LICHT normale Blitzautomatik mit Rotaugen-Reduzierung Anti-Rotaugen-Licht Bitte beachten › Der Rotaugen-Effekt tritt vor allem bei geblitzten Portraitauf- Mit dieser Funktionen leuchtet die Anti-Rotaugen-LED nahmen im Dunkeln auf. für 1 s auf. › › Durch das Anti-Rotaugen-Licht wird der Rotaugen- Diese Funktion bleibt aktiv, bis eine andere gewählt wird. Effekt deutlich reduziert, weil das Licht ein Schließen der Pupillen bewirkt, bevor die Aufnahme erfolgt.
TAGESLICHT-AUFHELLBLITZ normale Blitzautomatik mit Aufhellblitz Tageslicht-Aufhellblitz Bitte beachten › › Wenn das Hauptmotiv im Schatten liegt und die Mit dieser Funktionen wird der Blitz unabhängig von Umgebungshelligkeit zu stark für die automatische Blitz- Motiv- und Hintergrundhelligkeit immer ausgelöst. zuschaltung ist, sorgt die FILL-IN-Funktion für eine Auf- hellung der Schattenpartien und somit eine ausgewoge- ne Belichtung.
LANGZEITSYNCHRONISATION normale Blitzautomatik mit Langzeit-Synchronisation Langzeitsynchronisation Bitte beachten › Blitzen mit Langzeit-Synchronisation läßt auch das Umge- Kamera auf einer festen Unterlage abstützen oder ein bungslicht zur Geltung kommen. Stativ benutzen, um nicht zu verwackeln. › flash-Taste 3x drücken, um diese Funktion zu aktivie- ren.
BLITZABSCHALTUNG Blitzabschaltung Bitte beachten › Zum Fotografieren mit dem vorhandenen Licht und Kamera auf einer festen Unterlage abstützen oder ein wenn Blitzen verboten oder störend ist, kann der Blitz Stativ benutzen, um nicht zu verwackeln. abgeschaltet werden. › flash-Taste 4x drücken, um diese Funktion zu aktivie- ren.
SELBSTAUSLÖSER Selbstauslöser › mode-Taste 1x drücken, um diese Funktion zu aktivie- ren. › Beim Auslösen sollte das AF-Meßfeld auf das Hauptmo- tiv oder ein anderes Detail in gleicher Entfernung zielen. › Nach Drücken des Auslösers leuchtet die Selbstauslö- ser-LED 7 s lang und blinkt dann die letzten 3 s vor der Aufnahme.
UNENDLICH-EINSTELLUNG Bitte beachten Unendlich-Einstellung › › Der Blitz ist in diesem Fall abgeschaltet. Die Unendlich-Einstellung eignet sich besonders, um › Kamera bei schlechten Lichtverhältnissen, besonders entfernte oder konturlose Motive wie Wolken, Feuer, mit Tele, auf einer festen Unterlage abstützen oder ein Rauch und durch Fensterscheiben oder Gitter zu foto- Stativ benutzen, um nicht zu verwackeln.
› Kamera vor Schlägen, Stößen und Vibrationen schüt- warm halten, z. B. in einer Tasche am Körper. › zen. Nach Fall oder Schlag einwandfreie Funktion kon- Bei einem Problem mit der Kamera an den Fotohändler trollieren. oder autorisierten Rollei-Service wenden.
Page 32
P (Panorama) 9,6 x 30,2 mm › Das Motiv mit dem AF-Meßfeld richtig anvisiert? » Den Abschnitt ”SUCHER” noch einmal lesen. Objektiv 4,0/28 – 8/60mm-Motor-Zoom, Nano 60 › Autofokusfenster verdeckt? 4,2/28 – 11/80mm-Motor-Zoom, Nano 80 » Darauf achten, daß Finger, Haare oder Trageschlaufe nicht davor hängen.
Page 33
170 g (mit Batterie) WIDE (28mm): ca. 0,7 – 5,0 m » TELE (60/80mm): 0,75 – 2,2 m Technische Änderungen vorbehalten. » Blitzfolgezeit: ca.6 s Alle Angaben entsprechend Rollei-Standard-Tests. Blitzfunktionen Anti-Rotaugen-Blitz, Aufhellblitz, Langzeitsynchro, Blitz aus Aufnahmefunktionen Unendlich-Einstellung, Selbstauslöser 10 s Bildzählwerk...
KURZ-HINWEISE Taste Funktion Bildformat mit C/H/P-Hebel wählen Titelauswahl title Zum Ändern zuerst title-Taste 2 s lang drücken bis Sprachencode blinkt. Mit Zoomtaste eine Sprache wählen. title-Taste drücken, um Titelnummer zu wählen. 1x flash Rotaugen-Reduzierung gegen rote Augen bei Portraits im Dunkeln 2x flash Aufhellblitz zur Schattenaufhellung bei Tageslicht...
Page 38
GENERAL About the camera The Rollei Nano will not take pictures when ... » › Never dismantle the camera yourself. It contains high- no battery is inserted or the battery is flat. › voltage elements which can be dangerous. This will also the lens slide is closed (camera switched off).
Page 39
TABLE OF CONTENTS We wish you every success with your Rollei Nano. Please Recommendation from the police crime prevention read through these instructions carefully before using the programme: camera. This will help you to make the best use of the many Put the fences out of business and save yourself unnecessary features on your new camera.
LCD-PANEL LCD-PANEL Please note The LCD display shows the date and frame number when the camera is switched off. Date/time/title number Title memory display Battery monitoring S. 11 Infinity setting S. 30 Self-timer S. 29 Anti-red-eye function S. 25 Slow sync mode S.
Page 43
APS (ADVANCED PHOTO SYSTEM) FUNCTIONS Index-Print 35mm film C = Classic H = High vision APS film P = Panorama 1. New film format IX-240 2. Index print › The cartridge is smaller than that of the normal 35mm An index print is sent back with the processed film and the film.
Page 44
3. Information exchange function (IX function) Please note › All the information needed to process the film is recorded Photo shops displaying the APS symbol guarantee (magnetically or optically). The PQI (Print Quality expert processing. Improvement) function allows the best possible enlargements to be made.
VIEWFINDER/AUTOFOCUS LED Viewfinder Autofocus LED › Image area outline with close-up (70 cm) The green LED lights up when the shutter release is Image area outline pressed gently. › Autofocus metering field LED lit: shutter release possible › LED flashes quickly: Subject too close (under 70cm). The shutter release is locked.
Open the battery compartment as shown. Only use a CR2 lithium battery. › › Insert the new battery correctly (plus terminal at front). The Rollei Nano switches off automatically after not › Close the battery compartment. being used for 3 minutes to save power. ›...
BATTERY MONITORING Battery monitoring Please note › The LCD symbol informs you of the battery status. Only change the battery when the camera is switched off. › › No symbol - battery working OK Take a spare battery with you in cold weather or on long ›...
/ symbol (Nano 80) or 5. If the film is not advanced properly, the symbol flashes symbol (Nano 60) . The camera does not accept in the LCD display. If this happens, re-load the film as other films (symbols , , ).
REWINDING THE FILM Auto rewind Manual rewind start › › The fully exposed IX film is rewound automatically. Partially exposed films can be rewound mid-roll by › When the film is completely rewound, the frame counter pressing the manual rewind button at any time. The film shows and the symbol flashes.
DIOPTER ADJUSTMENT ATTACHING CARRYING LOOP Diopter adjustment Attaching carrying loop › › Set the lens to tele and turn the diopter control until the Attach the carrying loop as picture appears sharp. shown.
SWITCHING ON THE CAMERA/ZOOMING Switching on the camera/zooming Please note: › › Press the main switch. The lens cover opens, the LCD If the zoom movement is hindered, appears on the displays light up. LCD display. If this happens, switch the camera off and ›...
Page 52
HOLDING THE CAMERA Holding the camera Please note › › Put your hand through the loop to hold the camera Make sure you do not obscure the lens, the autofocus securely. and exposure sensor window or the flash with your ›...
TAKING PICTURES › Taking pictures The Rollei Nano fires its flash automatically in poor › Make sure the subject is in the autofocus metering field lighting conditions. › in the middle of the viewfinder image (S. 43) Flash range for correct exposure (ISO 200) ›...
FOCUS LOCK › Focus lock Keep the camera steady and then completely press › The focus lock is an aid for focusing on objects outside down the shutter release. › of the middle of the picture (1). It functions as follows: When you take your finger off the shutter release the 1.
DATE IMPRINTING - - - - - - ‘ 9 9 3 20 No imprinting Year - month - day 3 20 ‘ 9 9 1. Setting the date format › Month - day - year Press the date button to call up the individual formats. (For sequence see figure on right) ›...
Page 56
DATUMS-/ZEITEINSTELLUNG 2 sec. 2. Date/time setting › Press the date button for 2 seconds until the first value ‘ 9 8 3 20 flashes. date › The following values are called up by pressing the button further. › To set the values press the zoom buttons (tele wide down)
Page 57
PRINTING TITLES Language codes and title texts ENGLISCH En -1 - I LOVE YOU En -2 - THANK YOU GERMAN SPANISH En -3 - SEASONS GREETINGS FRENCH En -4 - HAPPY BIRTHDAY En -5 - CONGRATULATION JAPANESE I LOVE YOU Printing titles Please note »...
PICTURE FORMATS C = Classic (2:3) Picture formats › Choose the desired APS picture format with the C/H/P lever. › Picture formats can be changed later at the processing laboratory. H = High vision (9:16) P = Panorama (1:3)
FLASH FUNCTIONS Auto flash Anti-red-eye flash Fill-in flash Slow sync mode Flash off Flash functions Using the flash button one of the following flash functions can be selected as required. › Auto flash › Anti-red-eye flash › Fill-in flash › Slow sync mode ›...
SHOOTING FUNCTIONS Normal auto self-timer infinity Shooting functions Use the mode button to select one of the following shooting functions: › Normal auto › self-timer › infinity...
ANTI-RED-EYE FLASH Normal auto flash Anti-red-eye-flash Anti-red eye flash Please note › The red-eye effect mainly occurs when flash portraits are With these functions the anti-red-eye LED lights up for 1 taken in the dark. second. › › The anti-red-eye flash significantly reduces red-eye This function remains active until another function is because the flash causes the pupils to close before the selected.
FILL-IN FLASH Normal auto flash with fill-in flash Fill-in flash Please note › › If the main subject is in the shade and the ambient When these functions are selected, the flash is always brightness is too strong for the automatic flash to be fired independently of subject and background triggered, fill-in flash will brighten up the shadow areas, brightness.
SLOW SYNC MODE Normal auto flash with slow sync mode Slow sync mode Please note › › Using flash with the slow sync mode allows the available Support the camera on a firm base or use a tripod to light to be utilized as well. avoid camera shake.
FLASH OFF Flash off Please note › › To take pictures with the available light and when flash Support the camera on a firm base or use a tripod to photographs are forbidden or disturbing to others, you avoid camera shake. can switch the flash off.
SELF-TIMER Self-timer › Press the mode button once to activate this function. › When the shutter release, the main subject or another detail at the same distance should be in the AF metering field. › After the shutter release is pressed, the self-timer LED lights up for 7 seconds and then flashes the last 3 seconds before the shot.
INFINITY SETTING Infinity setting Please note › › With this function the flash is off. The infinity setting is particularly suitable for shooting › In the case of poor lighting conditions, especially with remote or contourless subjects such as clouds, lights tele, support the camera on a firm base or use a tripod and smoke and shooting through windows or railings.
› camera is dropped or knocked, check that it works If you have a problem with the camera, contact your properly. photographic dealer or the authorized Rollei Service in › Keep the front element and metering window clean. your country.
The pictures are not sharp Lens › How is the subject shown in the AF metering field? 28 – 60mm f/4.0 - 8 motor zoom, Nano 60 » Re-read the section on the ”viewfinder”. 28 – 80mm f/4.2 - 11 motor zoom, Nano 80 ›...
Page 69
» integral, guide number 10.5 ,flash range (ISO 100-Film) Technical modifications reserved wide (28mm): app. 0.7 – 5.0 m All information in accordance with Rollei standard tele (80/60mm): 0.75 – 2.2 m tests. Flash interval: app. 6 s Flash functions...
BRIEF INSTRUCTIONS Taste Function Picture format with C/H/P lever Title selection title To change first, press title button for 2 seconds until the language code flashes. Choose a language with the zoom button. Press the title button to select a title number. 1x flash Red-eye reduction to reduce red-eye when shooting portraits in the dark...
Need help?
Do you have a question about the NANO 60 and is the answer not in the manual?
Questions and answers