Delay Rss - Roland VS-2480 Supplementary Manual

Algorithm List

Delay RSS

The right-side, left-side and center Delay sounds can be set separately. As RSS (p. 58) is connected to both the right
and left outputs, the sound image of the sound from the left-side channel is localized at 90˚ to the left and that of
the sound from the right-side channel at 90˚ to the right. The center Delay output can receive the Feedback effect.
fig.08-20
Input L
Input R
• The location is fixed; no azimuth or elevation can be specified.
• Refer to the column "Labeling on RSS product package"(p. 59).
Parameter (full name)
DlyRSS (Delay RSS):
Time (Delay Time)
shift (Delay shift)
C.Time (Center Delay Time)
RSS Lvl (RSS Level)
C-Lvl (Center Level)
LF Damp Gain (LF-Damp Gain)
LF Damp Freq (LF-Damp Frequency)
HF Damp Gain (HF-Damp Gain)
HF Damp Freq (HF-Damp Frequency)
FBLvl (Feedback Level)
FX Lvl (Effect Level)
DirLvl (Direct Level)
Phones (Phones)
*1 Refer to the column "Precautions for using RSS"(p. 59).
44
Direct Level
Feedback Level
L ch Delay
3 Tap Delay
Center Delay
R ch Delay
Direct Level
Setting
Gives three-dimensional location to Delay sounds.
0–1200 ms
L1200–0–R1200 ms
0–1200 ms
0–100
0–100
-36–0 dB
50–4000 Hz
-36–0 dB
1.0–20.0 kHz
-100–100
-100–100
-100–100
Off, On
RSS
RSS
Function
Sets the time from direct sound until when the left and right
delay sound is heard.
Sets the balance of the right and left delay times.
Sets the time from direct sound until when the center delay
sound is heard.
Sets the volume of the RSS sound.
Sets the volume for the center delay sound.
Sets the degree of attenuation in the low frequency band for
the center delay sound returned to the input.
Sets the frequency at which attenuation in the low
frequency band starts for the center delay sound returned
to the input.
Sets the degree of attenuation in the High frequency band
for the center delay sound returned to the input.
Sets the frequency at which attenuation in the High
frequency band starts for the center delay sound returned
to the input.
Sets the amount of the center delay sound should be
returned to the delay input.
Sets the volume of the delay RSS sound.
Sets the volume of the direct sound.
Set to On when you use headphones
Set to Off when you use speakers
Output L
Output R
*1