Error Messages
Too Many Markers!
The CD already has 98 markers, the maximum number of
markers it can hold.
Drive Unformatted!
The disk drive has not yet been initialized by the VS-2480/
2480CD. Initialize the disk drive.
If the disk drive has already been initialized by the VS-2480/
2480CD, there is a problem with its connections. Make sure
that the disk drive is properly connected.
Operation Canceled!
You have aborted the procedure by pressing [EXIT/NO].
Write Another CD?
The CD-writing operation is complete. If you want to write
the same data to a new disc, press [ENTER/YES]. Otherwise,
press [EXIT/NO].
Write Protected!
The disk drive is write-protected.
11