Water Drainage - Westinghouse WWT1284M7WA Manual

If you only have a cold water tap, you
must remove the inlet hose with the RED
ends from the washing machine and fit a
blank cap with a sealing washer to the
HOT water inlet valve, otherwise water
will leak out of the valve.
NOTE: With cold water tap only, you
must only select cold water tempera-
tures.
A blank cap is available in the manual
bag.

10.4 Water Drainage

1. Fitting hose former.
Obtain hose former from inside the
washbowl and fit it to the drain hose.
Pull apart to
insert hose.
Adjust length to suit
trough.
Hose
bend
Guide
hose
pull hose
2. Positioning of drain hose.
Adjust the free length of hose to suit
your installation.
It is important that the top of the
drain hose is above the joint
between the washing machine
cabinet and the top panel (see
picture).
Adjust this Top of drain hose must be
length to above the join (arrowed)
suit your between the top panel and
trough. the cabinet.
Trough
Please refer to the installation
instruction sheet, for more
information.
37