Setting A Program; Starting A Program; Interruption Of A Program; Changing A Program - Westinghouse WWT1284M7WA Manual

4.6 Setting a Program

Press Power (
the program selector to the required
program.
-
Your washing machine is now in
STAND-BY-MODE and ready to
wash your clothes.
-
The relevant light will light up.
-
The buzzer will sound.
- The selector dial can be turned
either clockwise or anticlockwise.
-
Once you selecte a program, the
program selected will stay at that
position for the whole of the cycle.
-
The display shows the program
duration.
If the settings shown on the control
panel are what you want to use,
press the Start/Pause touchpad to
start your wash.
If you want your laundry to be
washed with functions different from
the one proposed by the machine,
press Water Level, Soak, Rinse and
Spin option touchpads.
NOTE:
Different functions can be combined
which is dependent on the program
selected. When these touchpads are
pressed, the corresponding pilot
lights come on.
If you want to define the end of the
washing program, press the "Delay
End" touchpad repeatedly to choose
your machine end time.

4.7 Starting a Program

To start a program, press the Start/Pause
( ) touchpad, a default program
duration will be displayed on the screen.
NOTE
When you select the Rinse & Spin
program, there will be a delay of at least
2 minutes before the washing machine
starts to spin.
) touchpad, turn
This delay is a drain out period to ensure
the bowl is empty of water, which is
necessary before spin commences. Even
though you may have only put wet clothes
into an empty bowl, the delay before spin
will still occur to be safe and to protect
your washing machine.

4.8 Interruption Of A Program

If you have started your wash and you
wish to stop it for some reason, press the
Start/Pause touchpad to enter PAUSE
mode.
The time remaining is blink and the
Start/Pause LED will start flashing. Press
the Start/Pause again. The program will
continue.

4.9 Changing A Program

Changing a running program is possible
only by switching off the appliance.
-
Press the "Power" touchpad to cancel
the program and to turn off the
appliance.
-
Press the "Power" touchpad again to
start the appliance.
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.

4.10 Changing The Options

It is possible to change only some
options after the program has started.
Press the Start/Pause touchpad to
1.
enter PAUSE mode.
Change the options.
2.
Press Start/Pause touchpad again.
3.
The program will continue.
19