Software Update (Over Air Download); Software Update (Usb) - Logik L19HED12 Instruction Manual

Software Update (Over Air Download)

The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.
1. Press the MENU button and then press the
CHANNEL menu and then press the OK button.
2. Press the buttons to select Software Update(OAD) and then press
the OK button to select On.
3. Press the BACK button to return to the previous menu or press the
MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
5. During normal DTV viewing, if the TV detects the latest firmware from the
DTV signal, the Over Air Download screen will appear. Press the
to select Yes / No for the upgrade procedure.
6. If you select Yes, the over air download will start. Press the EXIT button if
you want to stop the download and exit the menu.
During download, please do not turn off or unplug your TV.
7. When the download is complete, the TV will automatically upgrade the
software.
8. When the update is complete, the TV will return to standby mode.
9. Press the button on the right side panel of the TV or on the remote
control to switch on the TV.
If you experience difficulties after the software update, we recommend
that you restore your TV to the factory default settings. To do this, follow
the steps below:
1. Press the MENU button to go to the MAIN menu. Press the
to select OPTION and then press the OK button.
2. Press the buttons to select Restore Factory Default and then press
the OK button. Press the
3. The TV will restore all settings and go to the First Time Installation. Follow
the First Time Installation steps (refer to page 17-19 for details).

Software Update (USB)

This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website:
http://knowhow.com/ or call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday
8am-8pm or Sunday 8am-6pm.
buttons to select the
buttons
button to select Yes to reset the setting.
CHANNEL
PICTURE
EXIT
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Channel Edit
Signal Information
CI Information
Software Update(OAD)Off
Software Update(USB)
New FW is available for upgrading
TV Version V0.01
Stream Version v0.03
Yes to upgrade.
No to ignore this upgrade.
Yes
Download
20%
EXIT
Software Update(OAD)
71%
buttons
SOUND
TIME
OPTION
LOCK
EXIT
GB
No
25