Unit Description; Initial Use - Beurer LW 230 Instructions For Use Manual

5. Unit description

1. Fan button
2. On/Off button
3. Air inlet
4. LCD display
5. Air outlet
6. Fill level sensor
7. Marker point for the
correct attachment of
the holder
8. Handle recess
9. Lock
10. Fan unit
11. Upper cover
12. Holder
13. Humidification discs
14. Tub
15. Use of silver ion pads

6. Initial use

Remove the transport lock
• Open the cardboard packaging.
• Keep the plastic covering closed and lift the device out using the handle recesses on the upper cover.
• Now remove all plastic films.
• Check the device, mains plug and cable for damage.
• Lift off the upper cover with the fan unit, lift out the humidification discs at the holder and remove the
transport lock from the tub and the fan unit. Check whether all transport locks have been removed.
• Open the silver ion pads' outer packaging and place both pads inside the tank. Use the equipment provided
for this.
• Reinsert the humidification discs. The holder automatically falls to the side and the humidification discs
are secured. Make sure that the red spot is on the top of the holder.
1
2
3
4
5
6
7
8
9
17
10
11
12
13
14
15