Table of Contents
Advertisement
Security Function Ver. 1.01 May 2016
B. Caution when performing dial transfer
After setting the country code, dialing operations may be selected after the switchboard dial
tone is detected depending on the destination. In this case, depending on the switchboard
connected to the machine and the type of dial tone received from the switchboard, dialing
operations may not be available. If that happens, you may be able to avoid the problem with
the following setting.
(1) Turn the Dial Tone Detection function OFF
1. Display the Service Mode screen.
2. Touch "FAX."
3. Touch "Line2."
4. Touch "Network."
5. Touch "Network Setting 2."
6. Touch "OFF" of Dial Tone Detection.
7. Touch "END."
8. Touch "Exit" on the Service Mode screen.
9. Turn OFF and ON the power switch.
When displayed the Service Mode screen, be sure to turn off the power after exiting the
Service Mode screen and wait for 10 seconds or more before turning on.
10. Perform the sending and receiving tests between the Machine and either the store
which offers the service or the local retailer, to check that it can be operated normally.
47
11. FAX function
Advertisement
Table of Contents
