Changing How Memory Numbers Are Indicated - Boss Giga Delay DD-20 Owner's Manual

Changing How Memory Numbers Are Indicated

Not only can you confirm the currently selected memory merely by checking the lit
MEMORY number indicators, you can also change the pattern in which the
indicators light up. Select the pattern that provides the easiest way to check the
memory in any particular environment.
When using the DD-20 in dimly lit surroundings, you can confirm memory
numbers more easily by using the Lighting Pattern 2 setting.
Lighting Pattern 1 (Normal):
Only the indicator for the selected memory lights up (or flashes).
fig.47
MANUAL
MANUAL
Lighting Pattern 2:
The number of indicators lighting up (or flashing) corresponds to the selected
memory number.
fig.48
MANUAL
MANUAL
1. Switch off the power.
2. While holding down the WRITE button and the SELECT button, switch on the power.
3. Press the SELECT button to set the MEMORY indicator lighting pattern.
fig.49
Lighting Pattern 1
4. Press the WRITE button.
After the MEMORY Number indicator begins flashing rapidly, the setting is stored
in memory and the unit returns to its ordinary state.
* To cancel the setting change and the unit returns to its ordinary state, then before you
press the WRITE button, operate the MANUAL/TAP or ON/OFF pedal.
MANUAL MANUAL
MEMORY 1
MANUAL MANUAL
MEMORY 1
Lighting Pattern 2
Settings Made When the Power is Switched ON
MANUAL
MEMORY 2 MEMORY 3
MANUAL
MEMORY 2 MEMORY 3
MANUAL
MEMORY 4
MANUAL
MEMORY 4
33