Changing And Storing The "Memory" Sound - Boss Giga Delay DD-20 Owner's Manual

Operation

Changing and Storing the "MEMORY" Sound

Do not switch off the power while a write operation is in progress.
1. Press the MANUAL/TAP pedal or the SELECT button to change to the
"MEMORY" sound.
2. Operate the knobs to change the sound.
* To avoid sudden inadvertent changes in sound, the E.LEVEL, TONE, and F. BACK knobs
are designed so that the setting does not change unless the knob is first turned as far as the
stored setting value. Once the position of the knob matches the setting value stored in
memory, the sound starts to change.
When a setting changes, the MEMORY indicator flashes automatically.
fig.21
3. Press the WRITE button.
The MEMORY indicator and the indicator for the currently selected memory
number start to flash, and the DD-20 is put into write standby.
fig.22
12
Blink
Write standby
Blink