Rear Panel - Boss Giga Delay DD-20 Owner's Manual

Part Names and Functions

Rear Panel

fig.26
INPUT Jacks (A (MONO), B)
This is the input jack for connecting to the
output of an electric guitar or other
instrument or effects processor.
For MONO use, make the connection to the
A (MONO) jack.
"Making the Connections" (p. 4)
* The INPUT A (MONO) jack also doubles
as the power switch when the unit is
running on battery power. The power
comes on when a plug is inserted into the
INPUT A (MONO) jack, and goes off when
it is unplugged. Unplug any connected
cords when the unit is not in use.
CTL PEDAL Jack
Connect an external control pedal (the optional BOSS
FS-5L/FS-5U) to this jack.
You can use the external control pedal to turn the
effect on and off, to input the delay time with Tap
Input, and to switch memories.
"Setting the External Pedal Function" (p. 31)
20
PHONES Jack
You can connect headphones here to monitor the
sound.
* Turn on the power before you connect
headphones. When turning off the power, first
unplug the headphones, then switch off the power.
* Please observe due caution when using
headphones while the Output Mode is set to +4 dB,
since their volume may get significantly higher.
AC Adaptor Jack
This jack is for connecting an AC adaptor
(BOSS PSA-series, sold separately).
Using an AC adaptor makes possible
long performances with no worry about
batteries going dead.
OUTPUT Jacks (A (MONO), B)
This jack is for connection to a
guitar/bass amp, another effects
processor, mixer, MTR, or the like.
For MONO use, make the connection to
the A (MONO) jack.
"Making the Connections (p. 4)