Installing The Da-Pci - Edirol DA-2496 Owner's Manual

Preparations for using the DA-2496

Installing the DA-PCI

Here's how to install the DA-PCI into the PCI slot of your computer. For
details on installing PCI cards, refer to the owner's manual of your computer.
1
Turn off the power of your computer, and disconnect the power cord.
2
Remove the cover of your computer, and remove the cover of the PCI
slot into which you will install the DA-PCI.
3
Insert the DA-PCI into the PCI slot. Make sure that the DA-PCI is
oriented correctly. If it is oriented incorrectly, it cannot be inserted.
4
Fasten the DA-PCI using the screws that had held the PCI slot cover in
place.
5
Re-attach the cover of your computer.
You must install the DA-PCI driver before you connect the DA-2496.
Now please continue with Driver installation and settings (p. 18).
913
• When circuit board installation is complete, double-check your work.
914
• Always turn the unit off and unplug the power cord before attempting
installation of the circuit board (DA-PCI).
915
• Install only the specified circuit board(s) (DA-PCI). Remove only the
specified screws.
16
Do not touch any of the
printed circuit pathways
or connection terminals.
Never use excessive force
when installing a circuit
board. If it doesn't fit
properly on the first
attempt, remove the board
and try again. remove the
board and try again.