Table of Contents
Advertisement
Installation, Operation and Maintenance Manual
VCIOM-17121-EN Rev. 0
•
Figure 18
•
Figure 19
•
Figure 20
Installation
Connect OM9 flat cable to connector on the logic board, see Figure 18.
Place the OM9 card onto the heatsink spacers and tighten the 4 screws; assemble
local mechanical indicator, see Figure 19.
Connect the 8-pin connector to connector J3 on OM9, see Figure 20.
Section 4: Installation
August 2022
screw
11
Advertisement
Table of Contents
