Table of Contents
Advertisement
3.
Press <SET > button again to confirm the setting.
FEB: Flash Exposure Bracketing
You can take three flash shots while automatically changing the flash output for each shot from
-3 to +3 in 1/3rd stops. The camera will record three images with different exposures: one
exposed according to camera calculations, one over-exposed and another under-exposed. Over
and under exposure amount is user adjustable. This function helps get correct exposure
especially in shooting moving objects or when environmental lights are complex.
1.
Press function button 3 <
will be highlighted on the LCD panel.
2.
Set the exposure bracketing amount.
● Turn the Select Dial to set the amount.
● "0.3"means 1/3 step, "0.7"means 2/3 step.
3.
Press <SET> button again to confirm the setting. Then the FEC and FEB settings are
displayed on the LCD panel.
FEB will be cancelled after three photos are taken.
For best results, set the camera drive mode to "single" and ensure the flash is ready before
shooting.
FEB can be used with FEC and FEL.
You can prevent the FEB from being cancelled automatically after three photos are taken.
ACL)
FEL: Flash Exposure Lock
The FEB shooting sequence can be changed. (C.Fn-FEB)
FEL can lock the correct flash exposure setting for any part of the scene.
With <ETTL> displayed on the LCD panel, press the camera's <FEL> button. If the camera does
not have the <FEL> button, press the <
1.
Focus the subject.
>. The icon <
> and the exposure bracketing amount
> button.
(C.Fn-FEB
Advertisement
Table of Contents
