Table of Contents
Advertisement
AF
Sv APOT
BEEP
LIGHT
LCD
1.
Press < Zm/C.Fn > Backlight/Custom Setting Button for 2 seconds or longer until C.Fn
menu is displayed. The "Ver x.x" in the top-right corner refers to the software version.
2.
Select the Custom Function No.
* Turn the Select Dial to select the Custom Function No.
3.
Change the Setting.
* Press<SET> button and the Setting No. blinks.
* Turn the Select Dial to set the desired number. Pressing <SET> button will confirm the
settings.
* After you set the Custom Function and press <MODE> button, the camera will be ready to
shoot.
4. In the C.Fn states, long press the "Clear"button for 2 seconds until "OK"is displayed on the
panel, which means the values in C.Fn can be reset.
AF-assist beam
Slave auto power off
timer
Beeper
Backlighting time
LCD contrast ratio
- → 0 → +
ON
ON
OFF
OFF
60min
60min
30min
30min
ON
ON
OFF
OFF
12sec
Off in 12 sec.
OFF
Always off
ON
Always lighting
0~9
10 levels
C.Fn-08
C.Fn-10
C.Fn-20
C.Fn-22
Advertisement
Table of Contents
