Table of Contents
Advertisement
A/B/C（RATIO A：B：C）。
3、Setting flash output.
● Press Function Button 3 <
groups. Press <SET> button to confirm.
4、Taking the picture.
● Each group fires at the set flash ratio.
● When ALL < RATIO OFF > is set, set A, B or C as the firing group for the slave units.
● To fire multiple slave units with the same flash output, select ALL < RATIO OFF > in step 2.
Setting <M> Flash Mode
You can directly operate the slave unit to manually set the manual flash or stroboscopic flash.
1、Setting the slave unit.
2、Setting flash mode to <M>.
● Press <> button so that < M > is displayed.
● Set the manual flash output.
6、Multi: Manual Wireless Flash Shooting
1、Setting <MULTI> stroboscopic flash.
● Press <MODE> button so that <MULTI> is displayed.
● Setting the stroboscopic flash.
The firing frequency of stroboscopic flash during the optic transmission wireless shooting can be
set from 1Hz to 199Hz (settings from 250 Hz to 500 Hz are not available).
>. Turn the Select Dial to set the flash output of the
Advertisement
Table of Contents
