Bunn Silver JDF-4S Installation & Operating Manual page 10

Ph or pc with non lit or lit graphic door, ph or pc with lit segment door

Hide thumbs Also See for Silver JDF-4S:

Table of Contents

Product Dispense Switch (Membrane Switch Machines)

A. Product Dispense Switch

Momentarily pressing and releasing one of the switches will initiate a timed dispense. Each station has three

different timed dispenses which are preset at the factory. Refer to DISPENSER USE section for preset volumes

and adjustment procedures.

B. Plus/Stop Switch

This switch can be used to "top-off" a beverage. Pressing and holding switch will initiate product flow from

the respective nozzle; releasing the switch will stop the flow. Momentarily pressing this switch during a timed

dispense will stop the flow.

C. Chilled Water Dispense Switch (Optional for JDF-4S only)

Pressing and holding switch will initiate chilled water flow from the nozzle; releasing the switch will stop flow.

FIG 11 Product Dispense Switches - JDF-2S

Dispense Lockout Switch

Early models has the dispense On/Off switch at the bot-

tom front of the dispenser behind the drip tray. Later

model juice dispensers has the switch located on the

rear side of the cabinet door at the top.

The switch is used to disable product dispense and door

LED lights, preventing unauthorized use.

FIG 14 Program Switch

OPERATING CONTROLS (Continued)

FIG 12 Product Dispense Switches - JDF-4S

FIG 13 Dispense Lockout Switch

Program Switch

This switch is located near the main control board next

to the refrigeration switch.

44744.2 110813

Table of Contents

Silver jdf-2s