Front Panel - Rocktron Rampage Bass 15 Instruction Manual

Front Panel

Input Jack
1
Using a standard guitar cable with a 1/4" jack - plug your bass into this jack.
Master Volume Control
2
The control adjusts the overall output of the amplifier. When turning the ampli-
fier on, make sure this control is turned all the way down to zero.
Bass Control
3
This control adjusts the amount of low-end frequencies applied to the signal.
Middle Control
4
Ths control adjusts the amount of mid-range frequencies applied to the signal.
5 Treble Control
Ths control adjusts the amount of high-end frequencies applied to the signal.
Headphone Jack
6
This 1/4" jack is used to connect to stereo headphones. Plugging into this auto-
matically mutes the speaker. This can also be used for direct recording as well in
situations where you want to mute the speaker while recording.
CD/MP3 INPUT
7
This 1/8 mini jack is used to plug an external CD/MP3 Player so that you can
jam along with songs.
On/Off Switch
8
This turns the amplifier on and off. When the LED is "lit" then the amplifier is
"on".