Front Panel; Input Jack; Gain Control - Rocktron Valve Sonic Plexi User Manual

Front Panel

1

INPUT jack:

This standard 1/4" mono jack provides an input to the VALVESON-
IC from a guitar or other effect.
2
TIGHT Switch:
This switch effects the input of the tube stage in the preamp and is
used in conjunction with the 1-2 Switch. When in the down position
the "tight" function is not active. When in the UP position it "tight-
ens" up the input which is found in more modern British amplifiers.
3
1 - 2 Switch:
This switch also effects the input of the tube stage in the preamp
1 = Replicates the more "modern" type of input used on British style
amps.
2 = Replicates a "fatter, classic" type of input used on the vintage
British amplifiers.
4
BRIGHT Control 0 - 5:
The control is a six position switch that provides 5 different bright
variations to the overall tone found in British amplifiers from vintage
to modern. 0 = off and 5 = the brightest.
5

GAIN control:

This control is used to determine the amount of GAIN Input level
driving the tubes.