Installing The Display Assembly; Removing The Camera - Dell PP50F Owner's Manual

Installing the display assembly

1 Place the display assembly to align with the screw holders on the chassis.
2 Tighten the screws to secure the display assembly to the chassis.
3 Place the rubber on both sides of the computer.
4 Route and connect the display and WLAN cables in the chassis.
5 Install the:
a system board
b system fan
c display cable
d power connector port
e palmrest
f keyboard
g memory
h WLAN card
i hard drive assembly
j base cover
k battery
6 Follow the procedure in

Removing the camera

1 Follow the procedure in
2 Remove the:
a battery
b base cover
c hard drive assembly
d WLAN card
e memory
f keyboard
g palmrest
h display cable
i system fan
j system board
k power connector port
l display assembly
m display bezel
24 Removing and installing components
After Working Inside Your computer.
Before Working Inside Your Computer.