Preparations for use
4.19 Torsional load of the drive train
4.19
Torsional load of the drive train
In the event of faults in the electrical connection during operation, excessive air gap torques can
lead to additional mechanical torsional load on the line shaft.
Note
The system planner is responsible for the entire drive train.
Torsional loadings of the shaft assembly
If the configuration does not correctly recognize the mechanical torsional loadings of the shaft
assembly, this can lead to serious damage to the machine. This can result in death, serious
injury or material damage.
When planning the system, consider the configuration data.
Note
You can find more information in Chapter 2 of catalog D81.8.
4.20
Transport
4.20.1
Safety instructions for transport
Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
● Machine dimension drawing and the associated explanations
● Transport data
● Rating plate and lifting plate, if available
● Shipping parts list
● Packaging
42
WARNING
down in EN 50110‑1 regarding safe operation of electrical equipment.
SIMOTICS FD 1MN1
Operating Instructions 02/2019