Commissioning At The Sinamics S/G Converter Using The Aop30 - Siemens SIMOTICS FD 1MN1 Operating Instructions Manual

Start-up
7.11 Setting the motor parameters at the converter
7.11.2

Commissioning at the SINAMICS S/G converter using the AOP30

In the AOP30, navigate as follows:
● Navigate within the selection fields using <F2> and <F3>.
● In the entry fields, you can either directly enter the required value or select it from a list.
● Activate the selection with <F5>.
114
SIMOTICS FD 1MN1
Operating Instructions 02/2019