Table 3-3 Data On The Rating Plate - Siemens SIMOTICS FD 1MN1 Operating Instructions Manual

Table 3-3
Item
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Relevant directives
The following directives are relevant for the SIMOTICS motor series.
European low-voltage directive
The SIMOTICS motor series complies with the requirements of the low-voltage directive
2014/35/EU.
Eurasian Conformity
The SIMOTICS motor series complies with the requirements of the Russia/Belarus/
Kazakhstan customs union (EAC).
Underwriters Laboratories
The SIMOTICS motor series generally complies with UL and cUL requirements as component
of motor applications - and is correspondingly listed. Specifically developed motors and
functions are the exceptions in this case. Carefully observe the content of the quotation, and
that there is a cUL-marking on the rating plate.
Quality management system
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
SIMOTICS FD 1MN1
Operating Instructions 02/2019
Data on the rating plate
Description
Type of motor
Order number
Identifier of the motor series
Serial number
Weight
Degree of protection
Type of construction
Permissible ambient temperature range
Thermal class of the insulation system
Thermal class of the utilization
Maximum speed [rpm]
Standards
Rated voltage [V] and connections
Rated current [A]
Item Description
(15) Rated power [kW or HP]
(16) Rated efficiency factor
(17) Rated speed [rpm]
(18) Rated frequency [Hz]
(19) Efficiency class (IE code) or efficiency ac‐
cording to IEEE112B or empty
(20) Efficiency according to IEC/EN 60034-2-1
or current at service factor power
(21) Motor design (converter or mains motor)
(22) Line voltage/frequency
(23) Optional additional data (e.g. service fac‐
tor, design and code letter, amount of cool‐
ing water and intake temperature, etc.)
(24) Country of manufacture and location
(25) Certification mark for UL/CSA + file number
(optional)
(26) Certificate number(s) for Ex motors for
Zone 2 (optional)
(27) Direction of rotation
(28) Data matrix code (order number and serial
number)
Description
25