INDEX Models and dimensions Possible failures and their elimination page page General reminders and notes Use and cleaning General reminders Warnings and hints for user Technical data Instructions for use Construction Switch on, start Laws, technical prescriptions of cooking and switch off and directives Special precautions Special requirements...
GENERAL REMINDERS AND NOTES - Read the warnings contained in this manual carefully as ration. they provide important information concerning safety du- - Apply exclusively to a service centre for repairs or main- ring the installation, use and maintenance of the appliance. tenance.
CONSTRUCTION LAWS, TECHNICAL PRESCRIPTIONS AND DIRECTIVES - Robust steel structure on 4 adjustable feet. Exterior and top finish entirely made of stainless steel 18/10. When installing the appliance it is necessary to follow and - Stainless steel pan with steel bottom in model comply with the following regulations: ACK20003.
Electrical connections - In addition, check that once the appliance has been in- and equipotential bonding stalled, the power cord is neither subject to stretch nor in contact with nor surfaces. Warning!: The appliance is supplied to operate - Now proceed to light the appliance as directed in the in- according to the power supply indicated on the data structions for use.
USE AND CLEANING WARNINGS AND HINTS SPECIAL PRECAUTIONS FOR USER The grills, particularly those with the pan bottom not in stain- - This manual contains all the instructions required for a less steel, are treated in the factory with mineral oil to protect proper and safe use of our appliances.
SPECIAL PROCEDURES - Remove the insulation protection (Pos. B), unloosing the IN CASE OF PROLONGED INACTIVITY fixing screws to the pan. - Remove the protection panel of heating elements. (Pos. C). - If the appliance is to stand idle for any length of time (e.g. - Remove the heating element support plate (Pos.
THE 2002/96/EC DIRECTIVE (WEEE): information to users This informational note is meant only for owners of equipment marked with the symbol shown in Fig. A on the adhesive label featuring the techni- cal specifications applied on the actual product (the label also giving the serial number). This symbol indicates that the product is classified, accor- ding to the regulations in force, as an item of electrical and electronic equipment and conforms to EU Directive...
Replacement of heating element Fixed front panel Rear protection Heating element protection panel Suport plate for heating element Heating element Nut M8 Boss for bulb protection Bulb Control knob Control knob Off position Minimum position Maximum position 006 - 03 - Electric tilting cooker...
WARNING THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY INACCURACIES IN THIS BOOKLET DUE TO COPYING OR PRINTING ERRORS. DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPRO- VEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSI- BLE IF THE INSTRUCTIONS CONTAINED IN THIS MA- NUAL ARE NOT OBSERVED.
Need help?
Do you have a question about the ACK2003 and is the answer not in the manual?
Questions and answers