Worx WX101.1 Original Instruction page 8

Hide thumbs Also See for WX101.1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
dry cloth if they become dirty.
h) Battery pack needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
i)
Do not maintain battery pack on charge when
not in use.
j)
After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
k) Recharge only with the charger specified
by Worx. Do not use any charger other than
that specifically provided for use with the
equipment.
l)
Do not use any battery pack which is not
designed for use with the equipment.
m) Keep battery pack out of the reach of
children.
n) Retain the original product literature for
future reference.
o) Remove the battery from the equipment
when not in use.
p) Dispose of properly.
q) Do not mix cells of different manufacture,
capacity, size or type within a device.
r)
Keep the battery away from
high pressure.
SYMBOLS
8
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water
20V Cordless Drill Driver
microwaves and
Do not burn
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Li-Ion battery. This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will then
Li-I on
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous
for the environment and for human
health since they contain hazardous
substances.
Wear protective gloves.
Lock
Screw driving
Drilling
Wood
Metal
High speed
Low speed
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx101Wx101 seriesWx101.9

Table of Contents