What Is Auto Dim; Can I Operate My Station On Battery Power Only; Battery: What Do The Battery Icons Mean; Weekday: How Do I Correct The Day Of The Week - La Crosse Technology CA79103 Faqs

You can set your backlight to automatically dim to level 1 at a set hour for sleeping, then
automatically return to full brightness when you wake.
Set Auto Dim (Hour only):
1. Hold the LIGHT button 2 seconds to enter dimmer set mode. AUTO DIM OFF will show.
2. Press the + or – buttons to turn dimmer (ON). AUTO DIM ON will show.
3. Press the LIGHT button to select start time (Hour) for dimmer. AUTO DIM START TIME and
the hour will flash.
4. Press the + or – buttons to change the hour for the dimmer to be low light level.
5. Press the LIGHT button to select start time for dimmer to be on High light level. AUTO DIM
STOP TIME and the hour will flash.
6. Press the + or – buttons to change the hour for the dimmer to be high light level.
7. Press the LIGHT button to confirm exit.
Note: Hold LIGHT button at any time to exit dimmer settings.

CAN I OPERATE MY STATION ON BATTERY POWER ONLY?

• No, the 5 volt power cord is required for your sensors to update.
• When you operate as a connected station, the 5 volt power cord is required to maintain Wi-
Fi connection and sensor updates.

BATTERY: WHAT DO THE BATTERY ICONS MEAN?

• A battery icon will appear near your Temperature/Humidity reading when you need to
charge the battery in your LTV-TH2i sensor.
• A battery icon will appear near your TIME reading when you need to change batteries in
your station.

WEEKDAY: HOW DO I CORRECT THE DAY OF THE WEEK?

• When operating as a standalone station, the day of the week will set when the Year, Month,
and Date are set. If your day of the week is incorrect, yet the month and date are correct,
please go the program menu

DOES THIS STATION HAVE 12 HOUR AND 24 HOUR TIME OPTIONS?

• Yes, you can select 12 hour or 24 hour time format in the

CAN I CHECK THE VERSION NUMBER OF MY FIRMWARE AND WIFI?

1. From a normal display hold the EXTRA & TEMP buttons together for 2 seconds to view the
station Firmware Version for 3 seconds, followed by the WI-FI Module Version for 3 seconds.
2. Press the LIGHT button at any time to exit.

WHAT IS AUTO DIM?

and check the YEAR setting.
program menu.
11 | P a g e