Information And Warning Messages - Husqvarna AUTOMOWER 550 EPOS Operator's Manual

Message
No power in charging station
Multiple reference stations

7.3 Information and warning messages

The information messages in the table below are shown in the
Speak to your Husqvarna representative if the same message shows frequently.
Message
Cutting system imbalance
Connectivity problem
Wrong PIN code
Ultrasonic problem
GPS navigation problem
1576 - 006 - 27.01.2023
Cause
Incorrect or damaged power supply.
Power failure.
The connection between the charging
plates on the product and the contact
plates on the charging station is not
good.
There is more than one reference station
near the work area. This can cause inter-
ference for the product from a different
reference station.
Cause
The product senses vibrations in the
blade disc.
®
Problem with the Automower
module.
An incorrect PIN code has been entered.
5 tries are permitted, and the product is
then blocked for a period of time.
Temporary electronic or firmware related
problem in the product.
Action
Examine the power supply. If it is neces-
sary, replace the power supply.
Examine and correct the cause for the
power failure of the reference station.
Make sure that the charging plates and
contact plates are connected.
Speak to your approved servicing dealer
if the same problem occurs frequently.
Messages menu in the Automower
Action
Examine the blades and screws for dam-
ages and wear. Make sure that all blades
are correctly installed and that there is
only one blade attached in each position
on the blade disc.
Connect Restart the product. If the connection
problem stays, disconnect the product
from Automower
pairing operation. If the problem stays,
speak to your local Husqvarna represen-
tative.
Enter the correct PIN code. If the PIN
code is incorrect, use the link in the
app to send the PIN code to your regis-
tered e-mail address. If you have not reg-
istered the e-mail address, speak to your
local Husqvarna representative.
Restart the product. If the problem stays,
speak to your approved servicing dealer.
®
Connect app.
® Connect and do a new
Troubleshooting - 37