Personnel Requirements - Redx RX- 0050 Manual

RX-0050
Lithium iron phosphate battery system User Manual
Personal Safety
If there is a probability of personal injury or equipment damage during operations on the equipment,
immediately stop the operations, report the case to the supervisor, and take feasible protective measures.
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telecommunication
network voltage (TNV) circuits.
Do not power on the equipment before it is installed or confirmed by professionals.

1.2 Personnel Requirements

Personnel who plan to install or maintain Redx equipment must receive thorough training,
understand all necessary safety precautions, and be able to correctly perform all operations.
Only qualified professionals or trained personnel are allowed to install, operate, and maintain the
equipment.
Only qualified professionals are allowed to remove safety facilities and inspect the equipment.
Personnel who will operate the equipment, including operators, trained personnel, and professionals,
should possess the local national required qualifications in special operations such as high-voltage
operations, working at heights, and operations of special equipment.
Professionals: personnel who are trained or experienced in equipment operations and are clear of
the sources and degree of various potential hazards in equipment installation, operation, maintenance
Trained personnel: personnel who are technically trained, have required experience, are aware of
possible hazards on themselves in certain operations, and are able to take protective measures to
minimize the hazards on themselves and other people.
Operators: operation personnel who may come in contact with the equipment, except trained
personnel and professionals.
Only professionals or authorized personnel are allowed to replace the equipment or components
(including software).
Document Version: V1.1
Issued Date: 2023-03-29
4