Table of Contents
Advertisement
RX-0050
Lithium iron phosphate battery system User Manual
Wear goggles, rubber gloves, and protective clothing to prevent skin contact with electrolyte in the
case of electrolyte overflow. If a battery leaks, protect the skin or eyes from the leaking liquid. If the
skin or eyes come in contact with the leaking liquid, wash it immediately with clean water and go to
the hospital for medical treatment.
Use dedicated insulated tools.
Move batteries in the required direction. Do not place a battery upside down or tilt it.
Keep the battery loop disconnected during installation and maintenance.
Use batteries of specified models. Using batteries of other models may damage the batteries.
Dispose of waste batteries in accordance with local laws and regulations. Do not dispose of batteries
as household waste. If a battery is disposed of improperly, it may explode.
The site must be equipped with qualified fire extinguishing facilities, such as firefighting sands and
powder fire extinguishers.
To ensure battery safety and battery management accuracy, use batteries provided with the
UPS by Redx. Redx is not responsible for any battery faults caused by batteries not provided
by Redx.
Battery Installation
Before installing batteries, observe the following safety precautions:
Install batteries in a well-ventilated, dry, and cool environment that is far away from heat sources,
flammable materials, moisture, extensive infrared radiation, organic solvents, and corrosive gases.
Take fire prevention measures.
Place and secure batteries horizontally.
Note the polarities when installing batteries. Do not short-circuit the positive and negative poles of
the same battery or battery string. Otherwise, the battery may be short-circuited.
Check battery connections periodically, ensuring that all bolts are securely tightened.
When installing batteries, do not place installation tools on the batteries.
Document Version: V1.1
Issued Date: 2023-03-29
NOTICE
9
Advertisement
Table of Contents
