Table of Contents
Advertisement
RX-0050
Lithium iron phosphate battery system User Manual
After installing the equipment, remove idle packing materials such as cartons, foam, plastics, and cable
ties from the equipment area.
In the case of a fire, immediately leave the building or the equipment area, and turn on the fire alarm bell
or make an emergency call. Do not enter the building on fire in any case.
Do not stop using protective devices. Pay attention to the warnings, cautions, and related precautionary
measures in this document and on the equipment. Promptly replace warning labels that have worn out.
Keep irrelevant people away from the equipment. Only operators are allowed to access the equipment.
Use insulated tools or tools with insulated handles, as shown in the following figure.
Do not scratch, damage, or block any warning label on the equipment.
Tighten the screws using tools when installing the equipment.
Do not work with power on during installation.
Repaint any paint scratches caused during equipment transportation or installation in a timely manner.
Equipment with scratches cannot be exposed to an outdoor environment for a long period of time.
Before operations, ensure that the equipment is firmly secured to the floor or other solid objects, such
as a wall or an installation rack.
Do not use water to clean electrical components inside or outside of a cabinet.
Do not change the structure or installation sequence of equipment without permission.
Document Version: V1.1
Issued Date: 2023-03-29
3
Advertisement
Table of Contents
