Advertisement
SECTIONS
Table of Contents
OPERaTION
Custom Layout Remote Configuration
While the 8 and 16 KVM Combiners are not controllable by an RS232, it
is possible to use an external RS232-to-keyboard translator that enables
you to send remote commands to the Combiner. The main use for this
functionality is to create a custom layout configuration.
In a custom layout configuration, you can position each channel
window in a specific location, with a specific size and scaling factor.
The structure of the command is:
"l Ctrl | l Ctrl | f11 | END | "channel number" | "operation Type" | location
(4 digits)"
HSL Secure 4/8/16-Port KVM Combiner User Manual
1
2
The operation types are:
1. Window top-left X location
2. Window top-left Y location
3. X length as a percent of total X width
4. Y length as a percent of total X width
5. X offset (the location of the window compared to the full image size
when larger).
6. Y offset (the location of the window compared to the full image size
when larger).
7. X scaling in percent.
8. Y scaling in percent
For example: "L Ctrl | L Ctrl | F11 | END |2 | 1 |5000" – sends channel
2's top-left corner to the middle of the screen, vertically.
For example: "L Ctrl | L Ctrl | F11 | END |2 |4 |4500" – makes channel
2 45% of the total screen size.
3
22
Advertisement
