Advertisement
SECTIONS
Table of Contents
OPERaTION
Cursor Navigation
(Virtual Display Technology - VDT)
With cursor navigation, you can move from one highly isolated
computer system to another, by simply moving the cursor across
display borders. There is no need to push any buttons. The keyboard
follows the mouse as the cursor crosses display borders.
Safety Triger
In order to avoid uncontrolled switching and in compliance with
the NIAP protection Profile, it is necessary to press and hold the left
CTRL key when switching channel using VDT.
HSL Secure 4/8/16-Port KVM Combiner User Manual
1
2
To enable cursor navigation, use the: "L Ctrl | L Ctrl | F11 | c" key
combination. (to disable, use: "L Ctrl | L Ctrl | F11 | b").
Please note: When switching to and from cursor navigation, the mouse
may become unusable for a few seconds, on initial switching.
Once using cursor navigation, you can switch easily and quickly
between sources, with no need to push any buttons. The keyboard is
always switched with the mouse.
3
13
Advertisement
